3) Hook the netting to the top of the volleyball net.  Space the hooks as wide as you can to ensure good shape and netting tension.  The hooks are pliable enough to be widened or closed up for you to make adjustments to your specific net.  (Note your hooks may appear different than those depicted).

4) Clip the arms of the frame to the bottom of the net as shown.  They should be clipped in line with the hooks at the top of the net.  

5) Extend the legs to the desired length by pushing down on the adjuster button and pulling out the cross-piece near the hinge.

Storage Recommendations

The Precision Passer comes in a sturdy shipping tube, which should prove suitable as a safe vessel to keep the target from being damaged in cramped storage areas.  Our first recommendation is to use that tube.  There are a couple of other options, though.

Hanging:  If you want to hang the Precision Passer on hooks (making sure it is not in an area where the netting could become entangled), you can easily do so.  Simply hook the rings holding the net-attaching hooks on to the frame (as shown on the left below), then hang the whole target on your pegs.

Rolling Up: You may also roll the Precision Passer up either for placement back in its tube, or placement on a shelf or in a corner, or to take with you.  To do so with the lowest risk of tangling, hook the net-attaching hooks to the rings on the frame (as above), fold the frame up, draw the netting in away from the ends of the frame (to avoid tangle) …

… then roll.